Skip to content
TallahasseeTung Oil
100% Pure Tung Oil — 128oz Gallon

Single product

100% Pure Tung Oil — 128oz Gallon

Sale price $66.99Regular price $75.95Save 12%1 gallonCovers about 400 sq ft

One gallon of the freshest, pure tung oil available — the size for floors, siding, boat work and shops that go through it. One gallon covers approximately 400 square feet. Hand packaged in recycled cans and sealed for shipping, with a batch number for the certificate of analysis and our signed guarantee of freshness.

Checkout runs on our secure store, where gift cards, coupons and loyalty points apply. Your order, tracking and account all stay in one place.

Origin
Grown and harvested on our own Gulf Coast farms
Extraction
Mechanical screw press — no hexane, no solvents
Verification
Certificate of analysis from an independent laboratory
On the label
Harvest date, press date, batch number, signed guarantee
SKU
860012337422
USDA Certified Biobased Product label: product 100%, FP

A USDA Certified Biobased Product. Measured at 100% biobased by an independent laboratory for the USDA BioPreferred® Program. What the label means

Applying it

Five steps, and most of them are waiting.

There is plenty of debate among woodworkers about the best finish. We will leave that alone and just tell you how we apply ours.

  1. 01

    Sand and clean

    Sand the surface to the smoothness you want — usually around 180 or 220 grit — and remove all the sanding dust.

  2. 02

    Wipe on sparingly

    Wipe on a 50/50 blend of tung oil and citrus solution with a lint-free cloth. Let it soak in for a few minutes, then rub vigorously with a clean cloth until no oil is standing on the surface. This matters: it is what gets the oil into the wood instead of leaving a sticky mess on top of it. On cutting boards and kitchen utensils, use our food-grade citrus solution.

  3. 03

    Wait, then repeat

    Apply the second coat after about 24 hours, the same 50/50 blend, the same way. How long you should actually wait depends on your temperature and humidity.

  4. 04

    Build the finish

    Three or four coats is usual. Tallahassee Tung Oil dries to the touch in four to five hours depending on your oil-to-solution ratio, and cures completely in two to three weeks when applied correctly.

  5. 05

    Take the compliments

    Enjoy how the finish pops the grain, and take some pride in making something that will last for generations.

Goes with this

All products →

Before you start

Rags soaked in any curing oil can ignite on their own as the oil oxidises. Spread them flat or hang them until hard, or submerge them in water in a sealed metal container. Read the full safety guidance.